Flammability Tester LFLC- A11

Flammability Tester LFLC- A11


Flammability Tester LFLC- A11 is a horizontal and vertical flame chamber with PLC touch screen control panel. The built-in thermocouple calibration and temperature control system maintains high degree of automation. It has automatic ignition and temperature function that display temperature and time. Applicable to the single wire and cable, and soft-line horizontal, vertical combustion test. Adjustable burning time and gas flow that can be automatic / manual, vertical / horizontal switching. Designed according to the relevant provisions of UL1581-2006 1080 (VW -1 combustion test) and 1100 section (horizontal sample/FT2 combustion test) standards. It is convenient to observe and reliable.

Control systemPLC touch screen display
Flame angleAdjustable
Flame height20 to 110 mm/min (adjustable)
Gas supplyMethane or prepared gas
Gas flowmeter1000 ml / min
Gas pressAdjustable
Air inlet height110 mm
Burn time0 to 999 s (adjustable)
Nozzle diameter9.5 mm
Nozzle length1.65 mm
Thermal sensor10.0 ± 0.05 g and thermocouple electrolytic copper piece
Thermocouple typeK type thermocouple (with 0.5 mm diameter stainless steel pipe coating)
Thermocouple diameter4 mm
Cabinet capacity4 cubic meter with glass watch door
Interior lamp sourceLED lamp
Test flame rising temperature102°C to 103°C in 56 s
After flame timeAdjustable
Sample vertical moving distanceSame as test standard UL1581
Sample horizontal moving distanceSame as test standard UL1581
Test precision0.01 s
External dimension (W × D × H)2100 × 1360 × 2200 mm
Power500 W
Power supplyAC 220 V, 50 / 60 Hz
Net weight300 kg
Gross weight400 kg
  • PLC touch screen large display
  • Control system includes flow meter, combustion reducing valve and u-shaped differential pressure meter
  • Test chamber consists of test part and control part
  • Main fixture: Test stand and burning torch
  • SUS 304 stainless steel stents and vertical point for test support
  • Stainless steel coated K type thermocouple
  • PID temperature controller with readings up to 1000°C
  • Spraying of high anti-corrosion coat on steel seal prevents air flow while testing
  • Adjustable flame height and stable flame burner in accordance with ASDM 5025-05
  • Enclosure tough glass front door for observation
  • Low noise industrial exhaust fan works rapidly, prevents explosion of person to gas completely
It is suitable for testing the flame retardant properties of insulation layer of the cable under abnormal condition such as overheat and overflow.