Electronic bending stiffness tester TP-E10 comes with microprocessor controlled system, highly advanced motor, low noise operations determines the bending stiffness/ rigidity of paper, paperboard, and plastic films. Stiffness tester is equipped with pneumatic clamps to hold the sample properly and eliminate the errors. It can determine the bending force (mN), bending stiffness torque (mNm) values of paper and cardboard, plastic films.
| Testing speed | 200° ± 20° / min |
| Test range | 1 to 10000 mN |
| Indicating Error | ± 1 % |
| Testing length | 5, 10, 15, 20, 25, 50 mm |
| Sample size | Width 38 ± 0.2 mm, length 70 mm |
| Bend angle | 1 to 90° |
| Dimension | 200×230×350 mm |
| Weight | 15 kg |
| Power supply | AC220 V ± 10 % , 50 Hz |
- Highly advanced motor with low noise operations
- Advanced data acquisition & data processing software
- LCD touch screen display
- Printer connection to print test report
- User friendly operations
Electronic bending stiffness tester is used to test the bending stiffness of paper and cardboard, plastic films
Paper Testing Instruments
Whiteness and chromaticity tester TP-A10
- Sample (size) length
- Diameter ≥30 mm, Thickness ≤ 40 mm
- Measurement mode
- Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b
- Stability
- ≤ 0.1 within 30 min
Whiteness meter TP-A11
- Sample (size) length
- Diameter ≥30 mm, Thickness ≤ 40 mm
- System
- D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm
- Light source
- D65 as illuminating source
Tensile Stiffness Tester TP-B10
- Sample (size) length
- 38×70 mm
- Measuring range
- (1-500) mN.m (divided into 7 small ranges)
- Indication error
- 0.02
Automatic horizontal tensile tester TP-B11
- Sample (size) length
- 90 to 200 mm
- Sample width
- 15 mm, 25 mm, 50mm
- Measuring range
- 0 to 30, 0 to 100 N,0 to 300 N
Plastic Testing Instruments
Vicat softening temperature & HDT machine TVHT-A10
- Operating temperature
- Ambient temperature to 300°C
- Heating rate
- 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)
- Maximum temp. error with heating speed
- ± 5°C under 50°C/ h, ± 1°C under 120°C/ h
Primary adhesive tester TPAT-A10
- Inclined adjustable angle
- 0 to 40°
- Panel width
- 120 mm
- Test area width
- 80 mm
Melt flow Indexer TMFI-A10
- Measuring range
- 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
- Measuring rate
- 0.001 S
- Temperature range
- 50 to 400°C
Melt flow Indexer TMFI-A11
- Measuring range
- 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
- Measuring rate
- 0.001 S
- Temperature range
- 50 to 400°C
Rubber Testing Instruments
DIN abrasion tester TDAT-A10
- Test arm weight
- 2.5 N
- Additional Loads
- 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
- Idler
- 150 mm
Mooney viscometer TMV-A10
- Control temperature range
- Normal temperature to 200°C
- Temperature display resolution
- 0.01°C
- Temperature control accuracy
- ± 0.3°
No rotor rheometer TNRR-A10
- Temperature tester
- Room temperature to 200°C
- Temperature display resolution
- 0.1°C
- Temperature control accuracy
- ≤ ± 0.3°C
Rubber low temperature brittleness tester TRBT-A10
- Temperature range
- -60°C to 0°C
- Temperature accuracy
- ± 0.5°C
- Impact speed
- 2 m/s ± 0.2 m/s
NDT Testing Instruments
Rockwell hardness meter TRHM-A10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 0 to 30 S
Rockwell hardness meter TRHM-A11
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 1 to 30 S
Rockwell hardness meter (motorized type) TRHM-B10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Brinell hardness test
- 306, 613, 1839 N
Digital low load Vickers Hardness tester TDVH-A10
- Test force
- 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
- Hardness value symbol
- HV1, HV5, HV10, HV20, HV30, HV250
- Error range in display
- ± 3.0 %, ± 2.0 %
Soil Testing Instruments
Soil moisture meter TSMM-A10
- Measurement range
- 0 to 80 %
- Resolution
- 0.1
- Accuracy
- ± 2 % n (non-saturation condition)
Soil moisture meter TSMM-A11
- Measurement range
- 0 to 90 %
- Resolution
- 0.1 or 0.01
- Accuracy
- ± 5 % n (non-saturation condition)
Soil moisture meter TSMM-A12
- Measurement range
- 0 to 60 %
- Resolution
- 0.1
- Accuracy
- ± 5 % n (non-saturation condition)
Soil Salinity tester TSST-A10
- Salinity Measurement range
- 0.00 to 19.99 ms/cm
- Measuring accuracy
- EC ± 2% full scale
- Temperature Measurement range
- -5 to 50°C