Drug Stability Test Chamber LDST-A24

Drug Stability Test Chamber LDST-A24

Drug Stability Test Chamber LDST-A24 designed with 1000L internal capacity volume. It offers 20 to 98 % RH humidity range and temperature ranges from 0℃ to 100℃. Designed to simulate constant climatic conditions for testing a wide variety of pharmaceutical raw Drug material or finished Drug products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.

Interior Volume 1000 L
Heat load 1000 W
Temperature Range 0℃ to 100 ℃
Temperature Deviation in time ± 2.0 ℃
Temperature Fluctuation ± 0.5 ℃
Humidity Range 20% to 98% RH
Humidity Deviation in time ± 2.5% RH
Cooling Rate 1 ℃ / min
Heating Rate 3 ℃ / min
Cooling system Mechanical compression refrigeration system
Refrigerating unit French TECUMSEH compressor
Refrigerant R404A, R23
Heating Element Nichrome heater
Controller Programmable color LCD touch screen controller Ethernet connection, PC Link
Water supply system Automatic water supply Water purification system
Humidifier External isolation, stainless steel surface evaporation humidifier
Dehumidification Evaporator
Temperature Sensor PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃
Humidity Sensor Dry and wet bulb sensor
Build-in Water Tank 270 × 300 × 450 mm
View Window Size 300 × 370 mm
Air Circulation Centrifugal wind fan
Exterior Material Steel Plate with protective coating
Interior Material SUS304 stainless steel
Thermal Insulation Polyurethane foam and insulation cotton
Observation Window Interior lighting, double-layer thermo stability silicone rubber sealing
Standard Configuration 1 Cable hole (Φ 50,) with plug; 2 shelves
Maximum Noise 65 dBA
Ambient Temperature 5℃ to +35 ℃
Relative Humidity ≤ 85% RH
Internal dimension 1000 × 1000 × 1000 mm
External dimension 1500 × 1550 × 2110 mm
Power Supply 220 V, 50 Hz / 380 V, 50 Hz
Net weight 570 kg
Gross weight 630 kg
  • Designed with PID controller system to control main unit, temperature system and Display
  • Double layer insulating glass 8 cm thick, made of tempered glass
  • Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
  • Heat load can absorb 1000 W in -20℃
  • Built-in LED light for the working room light which clearly observe samples
  • The filter element is suggested to be replaced once a year
  • Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
  • Designed with PT-100 sensor, real time accurate detection and display of temperature
  • Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
  • LCD display, which can display test conditions
  • Equipped with automatic humidification, which automatically heated by the humidification tank
  • High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
  • Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
  • 10 cm thick polyurethane foam and insulation cotton provides better insulation
  • Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
  • SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
  • 4 movable castors for ease moving, and with brakes function
Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.

Drug Stability Test Chamber LDST-A24

Drug Stability Test Chamber LDST-A24

Drug Test Chamber

Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.

Drug Stability Test Chamber LDST-A12

Drug Stability Test Chamber LDST-A12
  • Volume
  • 500 L
  • Temperature Range
  • 0 - 65 °C
  • Temperature Fluctuation
  • ± 0.5 °C
Drug Stability Test Chamber LDST-A10

Drug Stability Test Chamber LDST-A10
  • Volume
  • 150 L
  • Temperature Range
  • 0 - 65 °C
  • Temperature Fluctuation
  • ± 0.5 °C
Drug Stability Test Chamber LDST-A21

Drug Stability Test Chamber LDST-A21
  • Interior Volume
  • 225 L
  • Heat load
  • 1000 W
  • Temperature Range
  • 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A20

Drug Stability Test Chamber LDST-A20
  • Interior Volume
  • 100 L
  • Heat load
  • 1000 W
  • Temperature Range
  • 0℃ to 100 ℃

Ozone Test Chamber

Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.

Ozone Test Chamber LOC-A11

Ozone Test Chamber LOC-A11
  • Diameter of holder (mm)
  • 400
  • Length of each side (mm)
  • 180
  • Temperature range
  • 0℃ ~ 100℃
Ozone Test Chamber LOC-A10

Ozone Test Chamber LOC-A10
  • Temperature range
  • 0℃ ~ 100℃
  • Humidity range
  • 30 % - 98 % R.H
  • Temperature fluctuation
  • ± 0.5 ℃
Ozone Test Chamber LOC-A14

Ozone Test Chamber LOC-A14
  • Diameter of holder (mm)
  • 900
  • Length of each side (mm)
  • 460
  • Temperature range
  • 0℃ ~ 100℃
Ozone Test Chamber LOC-A13

Ozone Test Chamber LOC-A13
  • Diameter of holder (mm)
  • 700
  • Length of each side (mm)
  • 350
  • Temperature range
  • 0℃ ~ 100℃

Plant Growth Chamber

Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.

Plant Growth Chamber LPGC-B14

Plant Growth Chamber LPGC-B14
  • Chamber Volume
  • 1000 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber LPGC-A12

Plant Growth Chamber LPGC-A12
  • Chamber Volume
  • 800 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber LPGC-B13

Plant Growth Chamber LPGC-B13
  • Chamber Volume
  • 800 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃
Plant Growth Chamber LPGC-A13

Plant Growth Chamber LPGC-A13
  • Chamber Volume
  • 1000 L
  • Shelves
  • 3(PCS)
  • Display Resolution
  • 0.1 ℃

Salt Spray Test Chamber

Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.

Salt Spray Test Chamber LSSC-A11

Salt Spray Test Chamber LSSC-A11
  • Testing room capacity
  • 326 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95 to 98% RH
Salt Spray Test Chamber LSSC-A12

Salt Spray Test Chamber LSSC-A12
  • Testing room capacity
  • 410 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95 to 98% RH
Salt Spray Test Chamber LSSC-A13

Salt Spray Test Chamber LSSC-A13
  • Testing room capacity
  • 780 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95% to 98% RH
Salt Spray Test Chamber LSSC-A15

Salt Spray Test Chamber LSSC-A15
  • Testing room capacity
  • 1600 L
  • Temperature range
  • Ambient to +60°C
  • Humidity range
  • 95% to 98% RH

Sand Test Chamber

In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.

Sand and Dust Test Chamber LSC-A13

Sand and Dust Test Chamber LSC-A13
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand and Dust Test Chamber LSC-A12

Sand and Dust Test Chamber LSC-A12
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand and Dust Test Chamber LSC-A10

Sand and Dust Test Chamber LSC-A10
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um
Sand and Dust Test Chamber LSC-A11

Sand and Dust Test Chamber LSC-A11
  • Temperature range
  • Ambient to + 50 ℃
  • Relative Humidity
  • < 30 % RH
  • Normal wire diameter
  • 50 um

Popular Categories

Navigation

Contact Us Map