Paper tearing tester TP-J20

Paper tearing tester TP-J20

Paper tearing tester TP-J20 is an advanced instrument used for testing tearing strength of the paper and paperboard. This tearing tester comes with 43 ± 0.5 mm tearing distance and 104 mm long tearing arm to locate paper material properly & perform the tearing test.

Measuring range 0 to 1000 mN
Resolution 0.1 mN
Indication error ± 1 %
Tearing arm 104 ± 1 mm
Tearing angle 27.5° ± 0.5°
Tearing distance 43 ± 0.5 mm
  • Compact, portable design
  • Stainless steel right-angled triangular pyramid attached to solid arm design
  • Tearing angle 27.5° with ± 0.5° precision
  • User friendly operations
Paper tearing tester has applications in determining tearing resistance property of paper films, sheets, woven materials, polypropylene, polyester, paper, cardboard, textile material sheets etc.

Paper tearing tester TP-J20

Paper tearing tester TP-J20

Paper Testing Instruments
Carton compression tester TP-I10

Carton compression tester TP-I10
  • Measuring range
  • 0.1 to 10 kN
  • Indication error
  • < ± 1%
  • Platen Size
  • 500×500 mm (customized)
Folding endurance tester TP-M10

Folding endurance tester TP-M10
  • Measuring scope
  • 0 to 99999 s
  • Folding angle
  • 135° ± 2°
  • Tensile scope
  • 4.9 to 14.7 N
Pulp beating (refining) freeness tester TP-C10

Pulp beating (refining) freeness tester TP-C10
  • Measurement range
  • 0 to 100° SR
  • Sealed testing speed
  • 100 ± 10 mm/s
  • Volume of distilled water
  • 1000 ± 5 ml
Mullen burst tester TP-K10

Mullen burst tester TP-K10
  • Measurement range
  • 0 to 5600 kPa
  • Accuracy
  • ± 0.5 % F.S.
  • Compression speed
  • 170 ± 15 ml/min

Plastic Testing Instruments
Lasting adhesive tester TLAT-A11

Lasting adhesive tester TLAT-A11
  • Standard roller
  • 2000 ± 50 g
  • Testing stations
  • 6
  • Dimension (L*W*H) tester
  • 650×210×550 mm (6 stations)
Falling Weight Impact Tester TFWT-A10

Falling Weight Impact Tester TFWT-A10
  • Temperature range
  • 10 to 35°C
  • Maximum falling height
  • 2000 mm
  • Resolution of displacement
  • 1 mm
Heat sealer THS-A10

Heat sealer THS-A10
  • Seal temperature
  • Room temperature -250°C
  • Control accuracy
  • ± 0.2°C
  • Dwell time
  • 0.1 S to 999.9 S
Oxygen Index Tester TOIT-A10

Oxygen Index Tester TOIT-A10
  • Resolution
  • 0.1 % O2
  • Measuring range
  • 0 to 100 % O2
  • Precision
  • ± 0.4 % O2

Rubber Testing Instruments
Three roll mill machine TRMM-A10

Three roll mill machine TRMM-A10
  • Mixed capacity
  • 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg
  • Temperature range
  • RT to 300°C
  • Temperature control system
  • PID control
DIN abrasion tester TDAT-A10

DIN abrasion tester TDAT-A10
  • Test arm weight
  • 2.5 N
  • Additional Loads
  • 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
  • Idler
  • 150 mm
No rotor rheometer TNRR-A10

No rotor rheometer TNRR-A10
  • Temperature tester
  • Room temperature to 200°C
  • Temperature display resolution
  • 0.1°C
  • Temperature control accuracy
  • ≤ ± 0.3°C
Rubber low temperature brittleness tester TRBT-A10

Rubber low temperature brittleness tester TRBT-A10
  • Temperature range
  • -60°C to 0°C
  • Temperature accuracy
  • ± 0.5°C
  • Impact speed
  • 2 m/s ± 0.2 m/s

NDT Testing Instruments
Rockwell hardness meter (motorized type) TRHM-B10

Rockwell hardness meter (motorized type) TRHM-B10
  • Preliminary test force
  • 98 N
  • Total test force
  • 588, 980, 1471 N
  • Brinell hardness test
  • 306, 613, 1839 N
Portable Vibration Calibrator LPVC-A10

Portable Vibration Calibrator LPVC-A10
  • Frequency (continually adjustable)
  • 10 Hz to1280 Hz + 0.01 %
  • Amplitude acceleration ( at 30m/s2 pk )
  • 40 Hz to 320 Hz + 0.3 dB + 1 digit
  • Amplitude velocity ( at 25mm / sec pk )
  • 40 Hz to 320 Hz + 0.5dB +1 digit
Rockwell hardness meter TRHM-A11

Rockwell hardness meter TRHM-A11
  • Preliminary test force
  • 98 N
  • Total test force
  • 588, 980, 1471 N
  • Total test force dwell time
  • 1 to 30 S
Digital low load Vickers Hardness tester TDVH-A10

Digital low load Vickers Hardness tester TDVH-A10
  • Test force
  • 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N
  • Hardness value symbol
  • HV1, HV5, HV10, HV20, HV30, HV250
  • Error range in display
  • ± 3.0 %, ± 2.0 %

Other Testing Instruments
Benchtop gloss meter TBGM-A10

Benchtop gloss meter TBGM-A10
  • Test angle
  • 60°
  • Gloss aperture
  • 2 × 3 mm
  • Measurement range
  • 0 to 1000 GU

Popular Categories

Navigation

Contact Us Map